0 item(s) in My Cart

Vortech 6Z270-010 Fuel Management Unit Recalibration Kit (12:1 10:1 8:1 7:1 6:1 4:1)

Vortech 6Z270-010 Fuel Management Unit Recalibration Kit (12:1 10:1 8:1 7:1 6:1 4:1)

Vortech 6Z270-010 Fuel Management Unit Recalibration Kit (12:1 10:1 8:1 7:1 6:1 4:1)

Item No.
VOR-0759
$55.58

Buy Box
  1. Availability:
    In Stock
  2. Availability:
    Usually ships in 6 to 10 days

Product Details

The Vortech Standard Fuel Management Unit (FMU) is designed for use on multi-point electronic fuel injected engines. It is a secondary fuel regulator that installs in series with a stock regulator on the return line to the tank. The unit increases fuel pressure in proportion to boost pressure (this assumes the pump being utilized is of sufficient pressure and flow to deliver the fuel required). All Vortech FMUs feature CNC machined 6061-T6 aluminum construction and a blue anodized finish.The 12:1 FMU is standard in many Vortech systems. It is suitable for most applications running with original equipment injectors to maintain an air-to-fuel ratio of approximately 10.8 to 11.5:1 under boost. The pump utilized needs to provide sufficient flow to deliver the fuel pressure required in proportion to boost.The 10:1 8:1 and 7:1 FMUs are for Vortech applications that require less fuel pressure to maintain safe air-to-fuel ratios. The 6:1 4:1 and 3:1 FMUs were designed for high-output custom applications where larger than stock injectors have been employed. For example the 6:1 FMU can be used on Mustangs using either 30 36 or 38 lbs. per-hour injectors. The 4:1 unit was designed for either 38 or 42 lbs. per-hour injectors in the same application. Vortech FMU Recalibration Kits include a new ring washer and fluorosilicone diaphragm.Technical Tip:When using an FMU with larger injectors or for fine tuning when other components that alter airflow are being used Vortech offers an optional air bleed valve. This permits the rate of gain for any of the Vortech FMUs to be reduced by approximately two pounds of pressure per PSI of boost. It allows a 12:1 FMU to perform as a 10:1 unit. To alter the curve even greater refer to our 8:1 7:1 6:1 4:1 and 3:1 Recalibration Kits.

  • ** NOTE : PRODUCT IMAGE MAY NOT BE VEHICLE SPECIFIC